Shop by Category

Teflon™ PTFE Dry Film Lubricants

Teflon PTFE Coatings

Product Overview

Teflon™ PTFE one coats are superior dry film lubricants with a smooth and slick finish fusing to substrates with strong adhesion to provide great durability. These industrial coatings are excellent for minimizing friction and galling, as well as preventing seizing, especially where re-lubrication with fluid is inaccessible or there is exposure to dirt or dust. In addition to providing lubrication, fluoropolymer coatings used as dry film lubricants provide ancillary benefits of resistance to heat and cold, chemical and corrosion resistance, and release. Flexible cure temperatures of this product line make it more accessible to a broader range of coaters and end uses.

Performance & Properties

  • High Lubricity in a thin film system for Low Friction
  • Added fillers provide addition Abrasion Resistance for 958G-313, 406, 414
  • High Heat Resistance allows for operating temperatures of up to 500º F

    Properties of Teflon PTFE Coatings: Abrasion ResistanceProperties of Teflon PTFE Coatings: Low FrictionProperties of Teflon PTFE Coatings: Thermal Stability

Features & Benefits

  • Great for high heat resistance, with an in-use operating temperature of up to 500º F
  • Offering includes low cure temeratures as low as 350º F
  • Available in a thin film option (958G-303)
  • Superior adhesion
  • One coat systems offer ease of application
  • Solvent-based coating for easy clean up

Comparative Performance Qualities
Product Codes Lubricity Max DFT Operating Temp. Durability
958G-303 Excellent 0.8 mils 500º F Good
958G-313 Good 0.8 mils 500º F Better
958G-406 Good Up to 4 mils 500º F Better
958G-414 Good Up to 4 mils 500º F Best

Product Codes & Colors

  • One Coat | 958G-303 | Black
  • One Coat | 958G-313 | Black
  • One Coat | 958G-404 | Black
  • One Coat | 958G-414 | Dark Green


PTFE with PAI (polyamidimide) binder resin and additional fillers in 313, 406, 414.

Application Process

Surface is grit blasted with aluminum oxide, the coating is sprayed on, and is cured at 650º F for 15 minutes. Minimum cure of 350º F can be performed with additional time. See Fact Sheets for application information.

Download Marketing Material (PDF)


End Uses

  • Slide gates
  • Hinges
  • Blades
  • AC pistons
  • Springs
  • Bearings
  • Numerous automotive components
  • Lawn and garden
  • Guide rails

Purchasing Information

There are certain technical requirements when applying Teflon™, therefore registration is required to purchase Teflon™ coatings and gain access to Teflon™ Fact Sheets and SDS Information. Click here to register for an account. If you are already a registered user, sign in to see SDS and Fact Sheets and to purchase.

Product Availablity

Availability: Next day shipping by Intech

Ordering: Online, fax, and phone